polyester flat webbing sling

The flat hoisting belt is used for hoisting objects such as hooks. It can be suitable for hoisting objects under a variety of hoisting conditions. It has high strength and does not damage the surface of the object. It is light and soft, and can be used in various combinations. the way. The flat sling is made of 100% PES through weaving and stitching. And both ends of the sling can use reinforced eyelets or metal fittings to increase the strength. The flat sling can provide a wide and smooth load-bearing surface, which is especially suitable for lifting objects with soft surfaces. If necessary, it can also be used with a protective cover with a wider strap. Since there is no metal contact, it will cause minimal damage to the smooth and painted surface of the hoisted object. The flat lifting belt has higher safety. The weight is only 20% of the chain with the same load, it is safer in use and not easy to cause harm to the human body. It can be used in dangerous and explosive environments without causing sparks. In addition, the low extensibility of the flat belt can reduce the jump of the hoisted object during the hoisting operation, and avoid the damage of impact force. At the same time, the sling is dyed and coded to provide a simple method to confirm the load, which fully facilitates the hoisting user. It has higher protection against wear and damage. In the flat hoisting belt used for general hoisting, due to the superior performance of the hoisting belt, it has a relatively long working life, but at the same time, the correct protective cover must be used in the hoisting operation to prevent the hoisting belt from being damaged by sharp objects or objects. Cuts.

1. Usually flat chemical fiber slings are made of polyester, nylon, and polypropylene raw materials, and a variety of economical and applicable types are used for hoisting in various occasions.   2. They are mainly used for hoisting high-value, easily damaged or fragile objects.   3. The soft flat sling will lock the object tightly to ensure that the surface of the suspended object is not scratched or damaged, thereby ensuring safety.   4. The flat sling is light, with soft and elastic performance, easy to operate, simple and safe.   5. The elongation rate of nylon flat chemical fiber sling under safe load is 6-8%, and that of polyester is less than 3%.   6. Since the chemical fiber sling has the properties of resistance to chemicals, rot, mildew, and moisture, it has a long service life.   6. Usually polyester is used in acidic environment and nylon is used in alkaline environment. Polypropylene has strong resistance to acidity, alkalinity and most chemical conditions.   8. Flat chemical fiber slings are available with safety factors of 5:1, 6:1, 7:1, and 8:1.   9. It can be made into a variety of structures such as single-layer, multi-layer, with sheath, cushion and metal accessories.   10. We can perform PU treatment on the surface of the sling according to customer requirements to enhance the wear resistance and temperature resistance of the sling, thereby increasing the service life of the sling.